Extraction strip for air extraction on worktop surface
The headband is designed to protect the operator from formalin vapors while working.
These oblong holes allow the air flow to be extracted from the work table.
It is made of stainless steel 304, it has a front panel with a perforated plate (oblong 2×20 horizontal direction) in the lower part. Height of the front panel 150mm.
It is composed of an upper plenum height 150mm with a plate of distribution of the aspiration, a trapdoor of visit screwed on the sides and a hood of connection trapezoidal section for connection to a filter type H14 on Flange F353 with dimensions to be confirmed to us (photo external dimensions 710x405mm) located at 1960mm/ground.
Sliding manufacture between Headband and connection hood with trapezoidal section.
Dimensions :
Extraction band: Width from 100 to 400cm x height 37cm x depth 15cm
Chimney: Width 71cm x height 69cm x depth 15 – 40,5cm
Chimney outlet: Width 71cm x depth 40,5cm
Chimney inlet: Width 71cm x depth 15cm.
The headband is designed to protect the operator from formalin vapors while working. These oblong holes allow the air flow to be extracted from the work table. It is made of stainless steel 304, it has a front panel with a perforated plate (oblong 2×20 horizontal direction) in the lower part. Height of the front panel 150mm. It is composed of an upper plenum height 150mm with a plate of distribution of the aspiration, a trapdoor of visit screwed on the sides and a hood of connection trapezoidal section for connection to a filter type H14 on Flange F353 with dimensions to be confirmed to us (photo external dimensions 710x405mm) located at 1960mm/ground. Sliding manufacture between Headband and connection hood with trapezoidal section.
Dimensions :
Extraction band: Width from 100 to 400cm x height 37cm x depth 15cm
Chimney: Width 71cm x height 69cm x depth 15 – 40,5cm
Chimney outlet: Width 71cm x depth 40,5cm
Chimney inlet: Width 71cm x depth 15cm.
Packing: By unit with individual box.